The Mill foundation houses the drive gear-box which incorporates a thrust bearing to support the central shaft and endures the roller loads. The grinding rollers are hinged on the spider. The roller assembly is uniquely designed to prevent the possible entry of fine powder. A perfect ball bearing with neoprene rubber seal is incorporated to prevent the entry of dust to the roller arm assembly. The contact area between roller arms and bull ring is maintained in such a way to achieve uniform and gradual wear & tear of the Roller.
The Classifier helps to obtain any mesh size up to 500 mesh by increasing or decreasing the RPM of the Whizzer Classifier through a Variable Speed Drive Motor. A knob is provided to adjust the required mesh. This helps saving a lot of time, money & Energy. A Gear Box is mounted in the Classifier driven by 15 HP Electric Motor which is designed in such a way to prevent entry of the dust in the Gear Box.
The Fan casing is made from 5 mm M.S. Plate and suitable base is mounted with casing for the Electric Motor bearing Housing. The Base is made from 8 mm thick plate. The M.S Fabricated impeller is fitted on the shaft and shaft is mounted with Mono Plumber block and bearings. The double wall impeller provided is dynamically balanced. The blower is driven through a V-belt transmission with the help of Electric Motor.